olinsys powered by

Olinsys Transformer

Three Phase Dry Transformers

Share |
      Olinsys Products

  > UPS

  > Breakers
  > Capacitors
  > Contactors
  > TVSS
  > AC Drives
  > ATS
  > Power Generators
 Dry transformers
- Single Phase
      - Three Phase
      - Control
      - Buck Boost
      - K-Factor
      - Motor Isolation
   ●  Pad Mounted 
   ●  Pole Mounted
   ●  Substation
Cast Resin
   ●  Voltage Regulator
  > Batteries
  > Alternative Energy

  > Dist Hardware
  > Motors
  > Other Products

Transformers Series

AC reactors (480V)
For Industrial contro
l (120, 240, 416, 480, 600V)
For Lighting (120, 240V)

Optionals for Transformers

Check all catalogs here!


Three phase general purpose dry power transformers. From 3 to 500kVA and more options. (made in the USA ) Dongan series: 63, 76, and energy efficient 43, and 44.

Transformadores secos monofasicos. Desde 3 hasta 500kVA y mas. Disponibles en cajas en NEMA 1, NEMA 3R, NEMA 4, NEMA 12. Modelos Dongan: 63, 76, y los de alta eficiencia TP 43 y 44. Bobinados en aluminio o cobre.

three phase dry transformerA full complement of three phase ventilated transformers from 3kVA to 300kVA and more We offer encapsulated three phase transformers from 3kVA through 9kVA and ventilated from 15kVA and up. Our enclosures are NEMA 3R without the addition of a costly weather shield as standard with only some exceptions at the smallest kVA which are indicated in the catalog.



Our transformers can be wall mounted or floor mounted cabinet style depending upon the kVA rating. These are UL and CUL listed and are copper wound through 9kVA although we offer copper designs on any of the products in the catalog. Our aluminum wound transformers start at 15kVA and extend through 225kVA as standard off the shelf. We also build larger custom transformers too.


In addition, we also offer TP-1 Energy Efficient Transformers starting at 15kVA and larger as required by the D.O.E. These transformers meet the minimum energy efficiency requirements as set forth by the Department of Energy in EPACT. TP-1 transformers begin with the prefix 43 for aluminum wound and 44 for copper wound transformers.

All of our transformers have an electrostatic shield between the primary and secondary for transient noise reduction. Insulation systems are 200° or 220° depending upon the series of transformer. Dongan Authorized Distributor

Approval & Certification

    UL Listed

    CSA Certified


    CE Certified


Three Phase dry transformer catalog, Models: 63 & 76.pdf document

Three Phase TP-1 (Energy Efficient) catalog, Models: 43 & 44.pdf document

Three Phase CE approved (European Standards) catalog, Model: ES.pdf document

     Contact Now


  • design by:
  • Gabriel G
  • All other images and logos are the copyright and/or trademark of the respective owners.